Difference between revisions of "Analysis of Step 3"

From CFD Benchmark
Jump to: navigation, search
Line 28: Line 28:
 
[[File:yo2_y_nonreacting.pdf]]
 
[[File:yo2_y_nonreacting.pdf]]
  
Profile of mass fractions of H2 (left) and O2 (right) at t = 2τref ms, x = 0.5L, and z = 0.5L for 3-D non-reacting multi-species
+
Profile of mass fractions of <math>H_2</math> (left) and <math>O_2</math> (right) at <math>t = 2 \tau_{ref} ms</math>, <math>x = 0.5L</math>, and <math>z = 0.5L</math> for '''3-D non-reacting multi-species
flow (Step 3).
+
flow''' ('''Step 3''').
  
 
Regarding temperature, Figure 9 shows along the centerline '''two peaks''' and '''one valley''', as expected. Very small
 
Regarding temperature, Figure 9 shows along the centerline '''two peaks''' and '''one valley''', as expected. Very small

Revision as of 15:32, 24 August 2020

The main difference between this step and the previous one, is that now species and heat diffusion are additionally taken into account in an inhomogeneous environment. Neither analytical nor reference solution are available for this configuration, so that only comparisons between the three codes involved in the benchmark are possible. Compared to Step 2, the presence of high-temperature regions additionally modifies the evolution of the TGV with time, turbulence being locally damped due to dilatation and higher viscosities. As a consequence, the needed resolution for this case is less than in Step 2: YALES2 and DINO used only 256 grid points in each direction while Nek5000 used 36 elements (again with 7 Gauss-Lobatto-Legendre points in each element), i.e. 252 points in each direction.

The results that will be compared involve:

1. Velocity profiles at along the centerlines of the domain, as shown in Fig. 7;

2. Profiles of H2 and O2 mass fractions and profile of temperature at along the y-centerline of the domain, as illustrated in Figs. 8 and 9;

3. Evolution of maximal temperature in the domain vs. time, as depicted in Fig. 10.

Looking at the results of velocity (Fig. 7) at time along the centerlines of the computational domain, it is observed that the three codes deliver the same velocity profiles; the agreement is visually perfect. The results for the two main species mass fractions ( and ) are also in excellent agreement among the three participating codes, as it can be observed from Fig. 8.

File:Vx x 3d nonreacting.pdf File:Vy y 3d nonreacting.pdf File:Yh2 y nonreacting.pdf File:Yo2 y nonreacting.pdf

Profile of mass fractions of (left) and (right) at , , and for 3-D non-reacting multi-species flow (Step 3).

Regarding temperature, Figure 9 shows along the centerline two peaks and one valley, as expected. Very small deviations are revealed in the inlaid enlargements shown in Fig. 9. Finally, the evolution with time of maximum temperature inside the computational domain is presented in Fig. 10. Here again, no differences are observed at all concerning this parameter. As a conclusion concerning this step, the three codes are able to reproduce numerically the behavior of a complex multi-species, non-isothermal flow with excellent agreement, and are thus strong candidates for high-fidelity simulations of turbulent flames, as considered in the next and final step.